This page describes the Automotive Module

Petrol10, formerly known as DPF Remover, is a multifunctional application designed for professional tuning workshops that require a versatile solution for their mechatronics activities. When preparing a car for the track, in addition to mapping, it’s necessary to deactivate mechanical components that are not essential for racing, specifically those that limit the vehicle’s performance.

The application is intended for vehicles used in sports activities on closed or restricted circuits, in compliance with applicable regulations. MTX Electronics disclaims all liability for any use that does not comply with the laws of the country where it is used.

Why did the name change from DPF Remover to Petrol10 (pronounced Petrolio)? As the world is advancing from it's dependencies in fossil fuel to the digital era we too are evolving with a new approach to our marketing proposal, hense the name changes.

The software also includes many additional features and modules. Here are some highlights:

Faults Removal Module:
Used to remove individual or multiple engine faults 
(Indicated by the blue DTC icon in the below solutions list)

Automotive Calculations:
Useful for airflow estimation and unit conversions

Linear Extrapolation:
Useful for calibrating maps for higher values, such as injection duration or boost pressure

Similar File Search:
Locate similar files within folders and subfolders, ideal for browsing archives for related files

File Comparison:
Quickly identify if two files are different

View the screenshots on the right, you can click on a image to enlarge it.

Here is a summary of the available solutions for the automotive module (a detailed list can be found further down the page):

The software user interface is intentionally kept simple to ease the learning curve, the basic usage is:

1. select an engine control unit model and related solution from the list;
2. read the message panel for any recommendations that need to be followed on the vehicle;
3. load the BIN file that was read by OBD, Bootmode, Bench or BDM with the OPEN button;
4. press the PROCESS button to start the task;

... wait for the task to complete

5. if required remove extra fault codes with the built in dtc removal module;
6. save your finished work.

The most common question I receive via email is "Does this software really work? Do all the solutions work?" Let me be clear, nothing is perfect. The wide variety of control units with different firmware and updates can render a solution ineffective even if it would normally work.

If the software can not apply the modifications you will receive a message and will be prompted to send us the stock file using the "Send to support" window to signal the problem to our staff.

The software can be installed on multiple computers but execution is permitted on only one computer at a time by use of a USB dongle. The USB dongle must stay connected to the computer during application use.

By purchasing or using the software you agree to all the terms and conditions of the license agreement. If you do not accept and comply with these terms, you may not use the software or its features.

To place an order, please begin by registering an account on our website. Once registered, return to this page where you will now see a PURCHASE button at the top. Clicking this will add the product to your shopping cart from which you can proceed through the checkout process.

The USB dongle will be shipped within two (2) business days to the address provided during registration.

Please note that we ship directly only within Italy and other European countries. If you are located outside these regions kindly purchase through one of our official resellers. You can find a complete list of resellers at the following link, Official Resellers.

The software is sold AS IS we provide support only for IT software related issues (example: installation help, how to, PC compatibility, etc...)

If you have problems with a solution on a vehicle you can use the "Send to support" window to signal the problem to our staff.

The application is sold with included the first 18 months of new solution updates.

Renewal of the subscription plan for another 18 months costs 488euro (VAT included) and is required only to receive access to new solutions created after the expiry date.

If in the future you decide to not renew the subscription plan the software will continue to function and all solutions created within the expiry date will receive regular maintenance updates.